Mechanical & Welding Inspector is in charge of performing predefined checks regarding the conformity of mechanical and welding works concerning essentially concrete reinforcements, embedded items, steel liners, etc. during the construction phase, and steel supports, pipelines, equipment fixing, etc. during the installation phase. 

Responsibilities

• Ensure that the mechanical and welding works inspected are compliant with regulatory and technical requirements according to the Turkish law 30024
• Ensure the traceability of the inspections performed, of the defaults and deviations observed and of the non-conformities issued
• Verify the defaults, deviations or non-conformities are properly corrected
• Ensure his/her inspection activities are performed in a safely manner

Duties

• Take knowledge of NPP Project referential (norms and standards, specifications, procedures, etc.) related to the mechanical and welding works to be inspected
• Review and comment the execution documentation (technical drawings, quality plans …) related to the works to be inspected
• Prepare the inspection on site by identifying the elementary checks to be carried out, considering the requirements defined by the Turkish law 30024
• Conduct the inspection on site in order to verify the compliance of the mechanical and welding works executed with the execution documentation and applicable norms and standards
• Elaborate the Work Inspection Report in order to keep record of the content and the results of the inspection performed on site
• Describe and record the defaults or deviations observed during the inspection and follow-up their resolution
• Perform an assessment on the defaults and deviations recorded, and when decided, describe and write a non-conformity notification, then monitor the corresponding corrective and preventive actions
• Launch when necessary independent tests on samples (i.e. welded elements), to be performed by accredited laboratories and follow up the results
• Respect the existing AEOS project Quality Assurance processes and HSE requirements
• Contribute to the elaboration of the AEOS Project Monthly Report, by providing information on inspection activities carried out during the month
• Attend, on request, internal or external technical meetings

Interfaces

• Belong to the AEOS Inspection Team
• Report to the Mechanical & Welding Lead Inspector and follow his/her instruction
• Notify the Mechanical & Welding Lead Inspector of non-conformities and follow up on resolution of non-conformance reports
• Interface with the AEOS Project Support Team, on documentation management topics and for the elaboration of the Monthly Report
• Respect the instructions given by the QHSE team regarding Quality Assurance and HSE requirements
• Communicate and exchange on a daily basis with all the stakeholders involved in the mechanical and welding works

Knowledge

• Good knowledge of the following standards:

o ISO 9001

o ISO 3834

o ISO 17660 (will be a plus)

o GOST 5264-80 (will be a plus)

o GOST 14771-76 (will be a plus)

o SP 70.13330-2012 (will be a plus)

o Russian PNAE 10-031-92 (will be a plus)

o Russian PNAE 10-032-92 (will be a plus)

• Fluent in Turkish – read and spoken
• Fluent in English – read, spoken and written
• Fluent in Russian – read, spoken (will be a plus)
• Microsoft Office software (professional use)

Skills

• Ability to quickly understand technical requirements (e.g. specifications, drawings, codes, norms)
• Ability to write technical documents and reports
• Good written and verbal communication skills
• Ability to communicate proactively in a multicultural environment
• Ability to meticulously observe in order to detect non-compliances

Behaviour

• Impartial and upright: capacity to stay neutral and to perform independent inspection
• Resistance to pressure from others in order not to deviate from quality and safety targets
• Organised: capacity to efficiently identify and manage the element to be inspected, and to properly address the phases of inspection in due time (preparation, execution and reporting)
• Rigorous: able to collect and record justifications to support results of inspection

Education

• Technical diploma in mechanical field (High school + 2 years as a minimum)
• Undergraduate diploma in mechanical field (High school + 4 years, will be a plus)
• Specialization in welding

Experience

• 3 years in inspection and/or in quality assurance/quality control in mechanical and welding engineering
• 5 years minimum of professional experience in mechanical and welding engineering
• Experience in construction or industrial projects
• Experience in a Russian construction project (will be a plus)

Qualification

• CSWIP 3.1 welding inspector certification
• ISO 9001 certificate (will be a plus)
• Certificate for visual inspection (will be a plus)
• Certificate in NDT (will be a plus)

Specific requirements

• Driving license mandatory
• Military service completed
• Flexibility in working time due to construction site necessities

We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future.